The conference is co-organized by:
- Ministry of Regional Development, Building and Housing Communal Services of Ukraine;
- Kyiv City State Administration;
- National Academy of Sciences of Ukraine;
- International Association for Shell and Spatial Structures – IASS (Spain);
- Ukrainian State Corporation “Ukrmontazhspetsbud”;
- Ukrainian Academy of Construction;
- The E.O.Paton Electric Welding Institute;
- Technical committee TC 301 “Metalobudivnytstvo”.
Control dates:
Applications for participation in conference and abstracts of papers July 30th, 2013
(Extended to August 23rd, 2013)
Notification about preliminary acceptance of papers
August 12th, 2013
(Extended to September 13th, 2013)
Texts of papers should be sent to committee till
October 10th, 2013
Closing of conference
November 21st, 2014.
The conference topics
- 1. Development of rational types of the structural metalwork, experimental and theoretical investigation.
- 2. Development of calculation and design methods for metal structures and buildings.
- 3. Problems in automation of design process and calculation of the metalwork.
- 4. Improvements in fabrication and erection technologies of the metalwork, as well as repair and reconstruction of the buildings and structures.
- 5. Normative provision of quality and safety of buildings and structures. Development and improving of normative base in field of construction.
- 6. Problems of technical maintenance, methods of assessment of technical state and definition of residual resource of building structures.
Official languages
Ukranian, Russian and English are the official languages of Conference.
Development of rational types of the structural metalwork, experimental and theoretical investigation
V.N. Gordeiev, Dc.Sc.(Eng.), M. Shimanovska, Cand.Sc.(Eng.)
Usage of slipping cables concept for definition of cable grid net initial form
(LLC «V. Shimanovsky Ukrainian Institute of Steel Construction»", Ukraine) S. Pichugin, Dc.Sc.(Eng.), V. Chichulin, Cand.Sc.(Eng.), K. Chichulina, Cand.Sc.(Eng.)
Development of contructional solutions of steel beams with corrugated web
(Poltava National Technical Yuri Kondratyuk University, Ukraine) V. Klimenko, Cand.Sc.(Eng.), N. Bugayenko
Connections on shearing rings in modern structures made of glued wood
(Kyiv National University of Construction and Architecture, Ukraine) L. Kaganovsky
New constructional solutions of tetrahedral structural pyramidal tower (Israel) L. Kaganovsky
New constructional solutions of wind-driven electric plants with vertical revolution axis (Israel) L. Kaganovsky
New constructional solutions of pedestrian bridge (Israel) L. Kaganovsky
Kaganovsky new space large-dimension trussed convertible structure (Israel) V. Bozhko, Cand.Sc.(Eng.)
New constructional solutions of light structures of single-storey industrial buildings
(LLC «V. Shimanovsky Ukrainian Institute of Steel Construction»", Ukraine) V. Fursov, Dc.Sc.(Eng.), A. Bidakov, postgraduate student, M. Puryadzanhah, postgra- duate student
Tests of new effective constructional forms of glued plywood beams
(Kharkiv National University of Construction and Architecture, Ukraine) V. Fursov, Dc.Sc.(Eng.), A. Bidakov, postgraduate student, M. Puryadzanhah, postgra- duate student
Glued plywood beams with X-shaped web
(Kharkiv National University of Construction and Architecture, Ukraine) V. Fursov, Dc.Sc.(Eng.), A. Bidakov, postgraduate student, M. Puryadzanhah, postgra- duate student
Experimental research of full-sized beams made of glued wood
(Kharkiv National University of Construction and Architecture, Ukraine) A. Marutyan, Cand.Sc.(Eng.)
Light metal structures made of crossed systems including “Pyatigorsk” type modules
(Branch of North-Caucasus Federal University in Pyatigorsk city, Russia) 1A. Golodnov, Dc.Sc.(Eng.), 2V. Psiuk, Cand.Sc.(Eng.), 3B. Ivanov
Deflected mode of steel double tees after high temperature influences on edges
(1LLC «V. Shimanovsky Ukrainian Institute of Steel Construction»", Ukraine 2Donbass State Technical University, Ukraine, 3ÎÎÎ "Promexpert Company", Ukraine) 1S. Skrebtsov, 2B. Ivanov
Experimental research of compressed steel elements after regulation of residual stress state on length parts
(1Lugansk National Agrarian University, Ukraine, 2ÎÎÎ "Promexpert Company", Ukraine) 1A. Golodnov, Dc.Sc.(Eng.), 2V. Riblov
Results of experimental definition of deflected mode of raised plates
(1LLC «V. Shimanovsky Ukrainian Institute of Steel Construction»", Ukraine, 2Lugansk National Agrarian University, Ukraine A. Goliadynets
Analysis of constructional technological parameters of separate foundations of skeleton constructions
(Kyiv National University of Construction and Architecture, Ukraine)
A. Bilyk
Theme
(Kyiv National University of Construction and Architecture, Ukraine)
Development of calculation and design methods for metal structures and buildings
Usage of slipping cables concept for definition of cable grid net initial form
(LLC «V. Shimanovsky Ukrainian Institute of Steel Construction»", Ukraine) S. Pichugin, Dc.Sc.(Eng.), V. Chichulin, Cand.Sc.(Eng.), K. Chichulina, Cand.Sc.(Eng.)
Development of contructional solutions of steel beams with corrugated web
(Poltava National Technical Yuri Kondratyuk University, Ukraine) V. Klimenko, Cand.Sc.(Eng.), N. Bugayenko
Connections on shearing rings in modern structures made of glued wood
(Kyiv National University of Construction and Architecture, Ukraine) L. Kaganovsky
New constructional solutions of tetrahedral structural pyramidal tower (Israel) L. Kaganovsky
New constructional solutions of wind-driven electric plants with vertical revolution axis (Israel) L. Kaganovsky
New constructional solutions of pedestrian bridge (Israel) L. Kaganovsky
Kaganovsky new space large-dimension trussed convertible structure (Israel) V. Bozhko, Cand.Sc.(Eng.)
New constructional solutions of light structures of single-storey industrial buildings
(LLC «V. Shimanovsky Ukrainian Institute of Steel Construction»", Ukraine) V. Fursov, Dc.Sc.(Eng.), A. Bidakov, postgraduate student, M. Puryadzanhah, postgra- duate student
Tests of new effective constructional forms of glued plywood beams
(Kharkiv National University of Construction and Architecture, Ukraine) V. Fursov, Dc.Sc.(Eng.), A. Bidakov, postgraduate student, M. Puryadzanhah, postgra- duate student
Glued plywood beams with X-shaped web
(Kharkiv National University of Construction and Architecture, Ukraine) V. Fursov, Dc.Sc.(Eng.), A. Bidakov, postgraduate student, M. Puryadzanhah, postgra- duate student
Experimental research of full-sized beams made of glued wood
(Kharkiv National University of Construction and Architecture, Ukraine) A. Marutyan, Cand.Sc.(Eng.)
Light metal structures made of crossed systems including “Pyatigorsk” type modules
(Branch of North-Caucasus Federal University in Pyatigorsk city, Russia) 1A. Golodnov, Dc.Sc.(Eng.), 2V. Psiuk, Cand.Sc.(Eng.), 3B. Ivanov
Deflected mode of steel double tees after high temperature influences on edges
(1LLC «V. Shimanovsky Ukrainian Institute of Steel Construction»", Ukraine 2Donbass State Technical University, Ukraine, 3ÎÎÎ "Promexpert Company", Ukraine) 1S. Skrebtsov, 2B. Ivanov
Experimental research of compressed steel elements after regulation of residual stress state on length parts
(1Lugansk National Agrarian University, Ukraine, 2ÎÎÎ "Promexpert Company", Ukraine) 1A. Golodnov, Dc.Sc.(Eng.), 2V. Riblov
Results of experimental definition of deflected mode of raised plates
(1LLC «V. Shimanovsky Ukrainian Institute of Steel Construction»", Ukraine, 2Lugansk National Agrarian University, Ukraine A. Goliadynets
Analysis of constructional technological parameters of separate foundations of skeleton constructions
(Kyiv National University of Construction and Architecture, Ukraine)
A. Bilyk
Theme
(Kyiv National University of Construction and Architecture, Ukraine)
A. Yugov, Dc.Sc.(Eng.), A. Bondarev, postgraduate student
Program complex of calculation of spatial dimension chain for metal rod structures
(Donbass National Academy of Civil Engineering and Architecture, Ukraine) R. Kharchenko, Cand.Sc.(Eng.), E. Kryat
About FEM calculation of cable-rod systems
(LLC «V. Shimanovsky Ukrainian Institute of Steel Construction», Ukraine) E. Yegorov, Dc.Sc.(Eng.), L. Kupnevich
FEM models for calculation of corrosive structures tasks
(Prydneprovska State Academy of Construction and Architecture, Ukraine) E. Yegorov, Dc.Sc.(Eng.), L. Kupnevich
Optimization of thin-walled beams with help of numerical methods
(Prydneprovska State Academy of Construction and Architecture, Ukraine) K. Golodnov, A. Bambura, Dc.Sc.(Eng.)
Bearing capacity of steel reinforced concrete beams at repeated and alternating loads
(state enterprise “State Research Institute of building structures”, Ukraine) Y. Otrosh, Cand. Sc.(Eng.), I. Tkachuk, M.M. Seminog
Influence of technological factors on fire resistance of reinforced concrete plates
(The Academy of Fire Safety named after Chernobyl Heroes, Ukraine) E. Kondratiuk
Special features of construction and calculation of steel reinforced concrete beams under the condition of free rest of plates
(Donbass State Technical University, Ukraine)
Improvements in fabrication and erection technologies of the metalwork, as well as repair and reconstruction of the buildings and structures
Program complex of calculation of spatial dimension chain for metal rod structures
(Donbass National Academy of Civil Engineering and Architecture, Ukraine) R. Kharchenko, Cand.Sc.(Eng.), E. Kryat
About FEM calculation of cable-rod systems
(LLC «V. Shimanovsky Ukrainian Institute of Steel Construction», Ukraine) E. Yegorov, Dc.Sc.(Eng.), L. Kupnevich
FEM models for calculation of corrosive structures tasks
(Prydneprovska State Academy of Construction and Architecture, Ukraine) E. Yegorov, Dc.Sc.(Eng.), L. Kupnevich
Optimization of thin-walled beams with help of numerical methods
(Prydneprovska State Academy of Construction and Architecture, Ukraine) K. Golodnov, A. Bambura, Dc.Sc.(Eng.)
Bearing capacity of steel reinforced concrete beams at repeated and alternating loads
(state enterprise “State Research Institute of building structures”, Ukraine) Y. Otrosh, Cand. Sc.(Eng.), I. Tkachuk, M.M. Seminog
Influence of technological factors on fire resistance of reinforced concrete plates
(The Academy of Fire Safety named after Chernobyl Heroes, Ukraine) E. Kondratiuk
Special features of construction and calculation of steel reinforced concrete beams under the condition of free rest of plates
(Donbass State Technical University, Ukraine)
A. Bulat, Dc.Sc.(Eng.), G. Shevchenko, Dc.Sc.(Eng.), V. Lenda, Cand.Sc.(Eng.)
Increasing of efficiency of technology of vibratory stabilization of residual stresses and geometrical dimensions in welding structures
(M.S. Polyakov Institute of Geotechnical Mechanics of National Academy of Sciences of Ukraine, Ukraine) Y. Tugaj
Technological solutions concerning disassembly of large-panel houses of the first mass series
(Kyiv National University of Construction and Architecture, Ukraine) G. Tonkacheyev, M.V. Klys, S.P. Sharapa
Efficiency of walls arrangement in multi-storey skeleton buildings by lift and turn method
(Kyiv National University of Construction and Architecture, Ukraine)
Normative provision of quality and safety of buildings and structures. Development and improving of normative base in field of construction
Increasing of efficiency of technology of vibratory stabilization of residual stresses and geometrical dimensions in welding structures
(M.S. Polyakov Institute of Geotechnical Mechanics of National Academy of Sciences of Ukraine, Ukraine) Y. Tugaj
Technological solutions concerning disassembly of large-panel houses of the first mass series
(Kyiv National University of Construction and Architecture, Ukraine) G. Tonkacheyev, M.V. Klys, S.P. Sharapa
Efficiency of walls arrangement in multi-storey skeleton buildings by lift and turn method
(Kyiv National University of Construction and Architecture, Ukraine)
V. Klimenko, Cand.Sc.(Eng.)
Comments to rejecting normative method of compression-bendable wooden elements calculation
(Kyiv National University of Construction and Architecture, Ukraine) E. Yegorov, Dc.Sc.(Eng.)
Methodological basis in design norms
(Prydneprovska State Academy of Construction and Architecture, Ukraine) E. Gorokhov, Dc.Sc.(Eng.), V. Mushchanov, Dc.Sc.(Eng.), A. Yugov, Dc.Sc.(Eng.)
From Donbass National Academy of Civil Engineering and Architecture experience concerning development of Ukrainian normative documents in branch of building metal structures design
(Donbass National Academy of Civil Engineering and Architecture, Ukraine)
Problems of technical maintenance, methods of assessment of technical state and definition of residual resource of building structures
Comments to rejecting normative method of compression-bendable wooden elements calculation
(Kyiv National University of Construction and Architecture, Ukraine) E. Yegorov, Dc.Sc.(Eng.)
Methodological basis in design norms
(Prydneprovska State Academy of Construction and Architecture, Ukraine) E. Gorokhov, Dc.Sc.(Eng.), V. Mushchanov, Dc.Sc.(Eng.), A. Yugov, Dc.Sc.(Eng.)
From Donbass National Academy of Civil Engineering and Architecture experience concerning development of Ukrainian normative documents in branch of building metal structures design
(Donbass National Academy of Civil Engineering and Architecture, Ukraine)
A. Lyubin, Cand.Sc.(Eng.)
Problems of ensuring reliability of blast-furnace jackets and air heaters
(Corporation "Promstalkonstrukciya", Ukraine) S. Kolesnichenko, Cand.Sc.(Eng.)
Principles of assignments of design and original sources for building structures
(Donbass centre of technological safety of V. Shimanovsky Ukrainian Institute of Steel Construction, Ukraine) A. Gibalenko, Cand.Sc.(Eng.)
Diagnostics of corrosion danger of metal structures of long-term operation objects
(Priazovskiy State Technical University, Ukraine) A. Gibalenko, Cand.Sc.(Eng.)
Engineering-technical maintenance of corrosion state diagnostics at reconstruction of production buildings
(Priazovskiy State Technical University, Ukraine) A. Gibalenko, Cand.Sc.(Eng.)
Quality management of metal structures anti-corrosion protection
(Priazovskiy State Technical University, Ukraine) 1I. Fomina, 2A. Golodnov, Dc.Sc.(Eng.)
Justification of prolongation of steel beams operation life
(1Public company "holding company "Kievgorstroy", Ukraine,
2LLC «V. Shimanovsky Ukrainian Institute of Steel Construction», Ukraine) 1A. Golodnov, Dc.Sc.(Eng.), 2Y. Slusar
Residual source of reinforced concrete beams which are used in agressive environment conditions
(1(LLC «V. Shimanovsky Ukrainian Institute of Steel Construction, Ukraine 2Lugansk National Agrarian University, Ukraine)
Participants without papers
Problems of ensuring reliability of blast-furnace jackets and air heaters
(Corporation "Promstalkonstrukciya", Ukraine) S. Kolesnichenko, Cand.Sc.(Eng.)
Principles of assignments of design and original sources for building structures
(Donbass centre of technological safety of V. Shimanovsky Ukrainian Institute of Steel Construction, Ukraine) A. Gibalenko, Cand.Sc.(Eng.)
Diagnostics of corrosion danger of metal structures of long-term operation objects
(Priazovskiy State Technical University, Ukraine) A. Gibalenko, Cand.Sc.(Eng.)
Engineering-technical maintenance of corrosion state diagnostics at reconstruction of production buildings
(Priazovskiy State Technical University, Ukraine) A. Gibalenko, Cand.Sc.(Eng.)
Quality management of metal structures anti-corrosion protection
(Priazovskiy State Technical University, Ukraine) 1I. Fomina, 2A. Golodnov, Dc.Sc.(Eng.)
Justification of prolongation of steel beams operation life
(1Public company "holding company "Kievgorstroy", Ukraine,
2LLC «V. Shimanovsky Ukrainian Institute of Steel Construction», Ukraine) 1A. Golodnov, Dc.Sc.(Eng.), 2Y. Slusar
Residual source of reinforced concrete beams which are used in agressive environment conditions
(1(LLC «V. Shimanovsky Ukrainian Institute of Steel Construction, Ukraine 2Lugansk National Agrarian University, Ukraine)
D. Barzylovich (The Ministry of Regional Development, Construction, and Communal Living of Ukraine )
V. Adrianov (LLC «V. Shimanovsky Ukrainian Institute of Steel Construction», Ukraine)
O. Kedich (close corporation "Ukrstalproject", Ukraine)
N. Vinogradsky (public company Makeevskiy metal structures factory, Ukraine)
S. Yevdokimov (state enterprise “Hyprokoks”, Ukraine)
A. Kravchenko (state enterprise “Hyprokoks”, Ukraine)
G. Romanova (state enterprise “Hyprokoks”, Ukraine)
I. Lerner (state enterprise “Hyprokoks”, Ukraine)
A. Malyarenko (public company "Ukrgasproject, Ukraine)
A. Boyadzhi (Odessa State Academy of Construction and Architecture, Ukraine)
E. Kas`yan (public company "IVP" VNIPITRANSGAS, Ukraine)
O. Molodid, Cand.Sc.(Eng.) (Kyiv National University of Construction and Architecture, Ukraine)
M. Nadtochiy (Kyiv National University of Construction and Architecture, Ukraine)
K. Chernenko, Cand.Sc.(Eng.) (Kyiv National University of Construction and Architecture, Ukraine)
D. Kazimir (Kyiv National University of Construction and Architecture, Ukraine)
Organizing committee